Automatic baking-free brick machine
Automatic baking-free brick machine is mainly used to suppress fly ash, river sand, the sand, sand, mineral powder, slag, stone powder, coal cinder, coal gangue, slag, chemical residue, etc as main raw materials of baking-free brick, pipe sand brick, refractory bricks and hollow bricks, porous brick, colored pavement production, is the country vigorously mediated environment-friendly building materials equipment.
Non-burning working principle:
The main motor drives the reducer to rotate through the belt on the pulley, and the power is transferred to the pinion shaft through the coupling.
The circular motion is transformed into the vertical and vertical motion of the beam by the crank link mechanism.
The movement of the beam up and down drives the cart forward and backward, and at the same time completes the work of feeding and pushing bricks.
When the beam is lifted, the spindle CAM pushes the lower head body and pushes the pressed products out of the mold cavity. The material car ACTS simultaneously, pushing the products out of the mold through the mold cavity to the pickup platform and supplying the mold cavity materials.
Pressing system: feeding, pressing, ejecting die cavity, ejecting products, feeding.
A cycle of work.
Precautions for non-burning:
1. The normal operating temperature between 30 ℃ ~ 60 ℃, the highest do not exceed 85 ℃,
2. The fuel tank should be kept clean and free of any sundries.
Dust.
3. The oil level of the oil tank shall be timely filled in as required.
4. The oil tank shall be cleaned in a timely manner, one month after it is put into use, and every six months after that, all the crude oil will be released.
Dust and debris shall not be found in the working environment. After 24h of precipitation, it shall be filtered by 15um filter net, and then injected into the clean fuel tank, and properly refueled.
It is not allowed to pour the contaminated bottom oil back into the tank, and dust and debris are not allowed in the working environment.
5. The circulating water in the cooler should be sufficient. If any water leakage is found, it should be promptly treated and the cooling water should be released in winter.
6. Always pay attention to the working conditions of the pressure gauge, electromagnetic valve and directional valve, and find out the abnormal situation and solve it quickly.
Applicable scope of non-firing brick machine:
It is mainly used for brick-pressing and forming of cement materials such as fly ash, river sand, sea sand, mountain sand, mineral powder, slag, stone powder, coal cinder, coal gangue, tailings slag, chemical slag, etc.
According to different moulds, the extruded shape is standard brick, porous brick, blind hole brick, hollow brick, pavement brick and bricks with special needs.
According to the later curing process, it can be divided into natural curing bricks without burning and autoclave curing bricks (autoclaved bricks).
Is in line with the national industrial policy and the national new wall material reform advocated by the environmental protection wall material processing equipment.
Features of non-firing brick machine:
The main features are complete seal of transmission part, automatic oil supply, circulating lubrication, no need for manual oil injection.
The rotary bar is separated from the gear body, so that the crankshaft gear pair is completely sealed.
Pressure piston multiple anti - dust, seal, pressure oil supply lubrication.
Ball bearing pair is adopted for the jacking rod.
The seasoning mechanism adopts worm worm gear to make the seasoning easy and reliable.
The concrete block making machine adopts high speed flywheel energy storage, low power, high pressure and good brick-forming.
Fully sealed, plunger pump pressure oil supply, circulation lubrication, compact and reasonable structure, efficient energy saving, novel and advanced, beautiful appearance, convenient operation, maintenance, safe and reliable.
All technical and economic indicators are advanced level of similar models, which is the first choice for users.
This equipment is eight-hole disc rotary unidirectional pressure machinery.
The brick pressing mechanism is the crank connecting rod mechanism.
It is mainly composed of deceleration drive mechanism, forming mechanism, seasoning mechanism, feeding mechanism, lubricating mechanism and electric control system.
The eight equal parts of the brick cavity are all arranged on the turntable. The turntable rotates counterclockwise intermittently along the neutral axis under the action of eccentric pull rod.
The deceleration drive mechanism, pressing forming mechanism, seasoning mechanism, feeding mechanism, turntable, track, rotary mechanism, lubricating system and electric control system are all fixed on the machine seat.
http://www.blocksmachine.com/
Non-burning working principle:
The main motor drives the reducer to rotate through the belt on the pulley, and the power is transferred to the pinion shaft through the coupling.
The circular motion is transformed into the vertical and vertical motion of the beam by the crank link mechanism.
The movement of the beam up and down drives the cart forward and backward, and at the same time completes the work of feeding and pushing bricks.
When the beam is lifted, the spindle CAM pushes the lower head body and pushes the pressed products out of the mold cavity. The material car ACTS simultaneously, pushing the products out of the mold through the mold cavity to the pickup platform and supplying the mold cavity materials.
Pressing system: feeding, pressing, ejecting die cavity, ejecting products, feeding.
A cycle of work.
Precautions for non-burning:
1. The normal operating temperature between 30 ℃ ~ 60 ℃, the highest do not exceed 85 ℃,
2. The fuel tank should be kept clean and free of any sundries.
Dust.
3. The oil level of the oil tank shall be timely filled in as required.
4. The oil tank shall be cleaned in a timely manner, one month after it is put into use, and every six months after that, all the crude oil will be released.
Dust and debris shall not be found in the working environment. After 24h of precipitation, it shall be filtered by 15um filter net, and then injected into the clean fuel tank, and properly refueled.
It is not allowed to pour the contaminated bottom oil back into the tank, and dust and debris are not allowed in the working environment.
5. The circulating water in the cooler should be sufficient. If any water leakage is found, it should be promptly treated and the cooling water should be released in winter.
6. Always pay attention to the working conditions of the pressure gauge, electromagnetic valve and directional valve, and find out the abnormal situation and solve it quickly.
Applicable scope of non-firing brick machine:
It is mainly used for brick-pressing and forming of cement materials such as fly ash, river sand, sea sand, mountain sand, mineral powder, slag, stone powder, coal cinder, coal gangue, tailings slag, chemical slag, etc.
According to different moulds, the extruded shape is standard brick, porous brick, blind hole brick, hollow brick, pavement brick and bricks with special needs.
According to the later curing process, it can be divided into natural curing bricks without burning and autoclave curing bricks (autoclaved bricks).
Is in line with the national industrial policy and the national new wall material reform advocated by the environmental protection wall material processing equipment.
Features of non-firing brick machine:
The main features are complete seal of transmission part, automatic oil supply, circulating lubrication, no need for manual oil injection.
The rotary bar is separated from the gear body, so that the crankshaft gear pair is completely sealed.
Pressure piston multiple anti - dust, seal, pressure oil supply lubrication.
Ball bearing pair is adopted for the jacking rod.
The seasoning mechanism adopts worm worm gear to make the seasoning easy and reliable.
The concrete block making machine adopts high speed flywheel energy storage, low power, high pressure and good brick-forming.
Fully sealed, plunger pump pressure oil supply, circulation lubrication, compact and reasonable structure, efficient energy saving, novel and advanced, beautiful appearance, convenient operation, maintenance, safe and reliable.
All technical and economic indicators are advanced level of similar models, which is the first choice for users.
This equipment is eight-hole disc rotary unidirectional pressure machinery.
The brick pressing mechanism is the crank connecting rod mechanism.
It is mainly composed of deceleration drive mechanism, forming mechanism, seasoning mechanism, feeding mechanism, lubricating mechanism and electric control system.
The eight equal parts of the brick cavity are all arranged on the turntable. The turntable rotates counterclockwise intermittently along the neutral axis under the action of eccentric pull rod.
The deceleration drive mechanism, pressing forming mechanism, seasoning mechanism, feeding mechanism, turntable, track, rotary mechanism, lubricating system and electric control system are all fixed on the machine seat.
http://www.blocksmachine.com/
评论
发表评论